Cody “Clix” Conrod can throw down a wall, ramp, floor, and cone faster than most players can decide which key to press. That kind of speed makes people curious, and the question they type into Google most often is simple: what keyboard does Clix use? The answer matters more than you might think, because in Fortnite the gap between a good build and a dead build is measured in milliseconds, and the keyboard sitting under your fingers decides how many of those milliseconds you keep.
In this guide, you will get the complete picture. We will cover the exact keyboard Clix runs today, the legendary 60% board he used to climb the competitive ladder, the switches inside those keyboards and why they feel different, his reported keybinds and how they pair with his hardware, and the rest of his peripheral lineup. You will also learn how analog Hall effect keyboards work, which myths about pro gear you should ignore, and how to put together a Clix-inspired setup at three different budget levels without wasting money on things that will not make you better.
The Short Answer: Clix’s Keyboard, Explained
Clix primarily uses the Wooting 60HE, a 60% analog keyboard built around magnetic Hall effect Lekker switches, and for years before that he was known for the Ducky One 2 Mini running Cherry MX Speed Silver switches. Both boards share the same core traits: they are compact, they are fast, and they get out of the way so his hands can move.
The reason for that pairing is not random. Clix plays with a fairly low sensitivity and a large mousepad, which means his mouse arm needs real estate. A 60% keyboard chops off the number pad, the function row, the arrow cluster, and the navigation keys, which frees up several inches of desk space. That extra room lets him angle the board and swing his arm without banging into anything.
The second reason is actuation speed. Fortnite building rewards players who can register inputs the instant their finger starts moving. Speed Silver switches actuate at roughly 1.2mm instead of the standard 2.0mm. The Wooting takes that idea further and lets you set actuation anywhere from about 0.1mm to 4.0mm, plus it adds Rapid Trigger, which we will break down in detail below.
One important note before we go further: pro settings change. Players swap boards for sponsorship reasons, comfort, or a new feature they want to test. Clix has been seen using Higround keyboards during content and stream sessions too. Treat this article as the complete map of his keyboard history and reasoning, and always double check a current settings page if you want a snapshot from this exact week.
A Timeline of the Keyboards Clix Has Used
Clix did not land on his current setup overnight. His keyboard journey tracks almost perfectly with how competitive Fortnite hardware evolved as a whole, which makes it a useful history lesson for anyone shopping right now.
In his early competitive years, he ran the Ducky One 2 Mini, which became almost a uniform for Fortnite pros. Later, as analog boards spread through the competitive scene around 2022 and 2023, he moved to the Wooting 60HE. Along the way he has shown off Higround boards, which are popular with creators for their artist collaborations and hot-swappable builds.
| Keyboard | Form Factor | Switch Type | Standout Feature |
|---|---|---|---|
| Ducky One 2 Mini | 60% | Cherry MX Speed Silver | 1.2mm actuation, PBT double-shot keycaps |
| Wooting 60HE / 60HE+ | 60% | Lekker (Hall effect magnetic) | Adjustable actuation and Rapid Trigger |
| Higround Basecamp 65 | 65% | Hot-swappable mechanical | Gasket mount feel, custom artwork |
Notice the pattern. Every board on that list is small, every board is fast, and every board keeps the same basic left-hand key layout. Clix never had to relearn muscle memory when switching, because the WASD cluster and the keys around it stayed in the same place. That is a lesson worth stealing: when you upgrade, upgrade the technology, not the layout.
Inside the Wooting 60HE: Why Analog Keyboards Took Over Fortnite
The Wooting 60HE is not a normal mechanical keyboard. Instead of metal contacts that touch and complete a circuit, each switch contains a tiny magnet. A sensor under the switch reads how close that magnet is and converts the distance into a precise depth reading. Because the board knows exactly how far down each key sits at every moment, it can do things a regular keyboard simply cannot.
Here is what that unlocks for a builder like Clix:
- Adjustable actuation: You choose the exact depth at which a key registers, often somewhere between 0.1mm and 4.0mm, and you can set it per key.
- Rapid Trigger: The key resets the moment you start lifting your finger instead of waiting to travel back past a fixed reset point.
- Analog input: The board can send gradient signals like a controller stick, which matters more in driving and racing games than in Fortnite.
- Mod Tap and dual bindings: A single key can do one thing on a light press and another on a full press.
- Low latency: Wooting boards are known for extremely fast input response and high polling rates.
Rapid Trigger in Plain English
Imagine you tap the wall key three times as fast as you physically can. On a standard mechanical switch, each press has to travel down past the actuation point and then travel back up past a reset point before the next press counts. If you machine-gun the key without fully lifting, some presses simply never register. Rapid Trigger removes that problem. The key registers on the way down and resets on the way up, based on direction of movement rather than a fixed position, so every micro-tap counts.
For Fortnite, that translates directly into cleaner build sequences and faster piece control. Players who switched to analog boards commonly report that resets, 90s, and tunnel edits feel noticeably crisper, even when their raw reaction time has not changed at all.
Where Analog Keyboards Are Headed
The Hall effect wave is still building. What started as one niche board from a small Dutch company turned into a full product category, with Razer, SteelSeries, Corsair, Keychron, and dozens of budget brands shipping magnetic switch keyboards. Prices have dropped from premium-only territory to under one hundred dollars for solid options.
The interesting question now is tournament policy. Because analog boards can enable things like snap tap or SOCD handling, where pressing A while holding D instantly flips your movement direction, some game developers and event organizers have pushed back and restricted those specific features. Standard Rapid Trigger and adjustable actuation remain widely accepted, but if you compete seriously, read your event rules before you rely on any advanced macro-style feature.
The Ducky One 2 Mini: The Board That Built a Generation
Before analog took over, the Ducky One 2 Mini was practically the official keyboard of competitive Fortnite. Clix used it, Bugha used it, and half of every tournament lobby seemed to have one on the desk. It earned that reputation honestly.
The One 2 Mini packed a lot into a 60% frame. It shipped with thick double-shot PBT keycaps that resist shine, a detachable USB-C cable for travel to LAN events, per-key RGB, and a reputation for lasting years under heavy abuse. Most importantly, Ducky offered it with Cherry MX Speed Silver switches, which cut the actuation distance down to about 1.2mm with a light 45g linear press.
Here is a real scenario that shows why that mattered. Picture a mid-game endgame box fight. Clix takes a wall, immediately cone-edits, drops a floor to grab high ground, and resets the wall behind him. That sequence might involve eight to twelve keystrokes in under two seconds. Shaving 0.8mm off every press does not sound dramatic on paper, but multiplied across thousands of inputs per match it changes the rhythm of how building feels.
If you are considering a used Ducky One 2 Mini today, keep these points in mind:
- It is not hot-swappable, so changing switches requires soldering.
- Layers and function combos handle everything the missing keys used to do, which takes about a week to learn.
- Speed Silvers are easy to bottom out and easy to mistype on, especially when you type essays or chat a lot.
- The stock stabilizers rattle a bit compared to modern custom boards.
- Newer analog boards outclass it on features, though the Ducky still feels great and holds resale value.
Switch Choice: The Real Reason His Keyboard Feels Fast
People obsess over the keyboard brand, but the switches inside do most of the work. Every board Clix has used shares the same philosophy: linear feel, light spring, short travel. No tactile bumps, no clicky noise, nothing that interrupts a fast finger.
Linear switches move straight down with no bump to push through. That consistency is what builders want, because your finger never has to overcome resistance mid-press. Tactile switches feel satisfying for typing, and clicky switches sound great on video, but both add a physical speed bump you must overcome dozens of times per fight.
| Switch | Actuation Point | Force | Feel | Best For |
|---|---|---|---|---|
| Cherry MX Speed Silver | About 1.2mm | Around 45g | Light linear, very short | Fast building, quick taps |
| Cherry MX Red | About 2.0mm | Around 45g | Standard linear | All-around gaming and typing |
| Gateron Yellow | About 2.0mm | Around 50g | Smooth linear, budget favorite | Value builds |
| Wooting Lekker (Hall effect) | Adjustable, roughly 0.1mm to 4.0mm | Around 45g | Smooth linear, fully tunable | Competitive Fortnite, Rapid Trigger |
One warning that trips up new players: shorter is not automatically better. If you set your actuation to 0.3mm, resting your fingers on WASD can fire off unwanted inputs. Many pros land somewhere between 0.6mm and 1.5mm for movement keys and go slightly deeper on keys they do not want to trigger by accident, like reload or inventory. Start moderate, then shorten gradually until you notice ghost inputs, then back off a little.
Clix’s Keybinds and How They Pair With a 60% Layout
A keyboard is only as good as the binds mapped onto it. Clix is famous for a build and edit layout that keeps every critical action within a tiny radius of his resting hand. He also offloads key builds to his mouse thumb buttons, which reduces how much his left hand has to travel.
His commonly reported layout looks roughly like this. Keep in mind pros tweak binds constantly, so treat this as a template rather than gospel:
- Wall: Mouse Button 4 (thumb button)
- Floor: Mouse Button 5 (thumb button)
- Stairs / Ramp: Left Shift or a nearby left-hand key
- Cone / Roof: F
- Building Edit: E
- Trap: T
- Harvesting Tool: 1
- Weapon Slots: 2 through 6
- Crouch: C or Left Ctrl
Why This Layout Works on a Small Keyboard
Look closely and you will notice something. Every bind sits inside a three-key reach of WASD. Nothing lives on the number pad, nothing lives in the function row, and nothing requires a full hand reposition. That is exactly why a 60% board is not a compromise for him. He literally never uses the keys a 60% removes during a match.
If you want to copy this approach, do not copy the binds blindly. Copy the principle instead. Sit with your hand on WASD, note every key you can hit without moving your palm, and assign your most-used actions to those keys only. Then push everything you rarely touch, like emotes and map, to distant keys or key combos.
Give Your Muscle Memory Time
Expect a rough week. Most players who overhaul their binds report their build speed drops for three to seven days, then climbs past where it started. Spend twenty focused minutes per day in Creative running the same build sequences on repeat. That deliberate practice rewires muscle memory much faster than grinding random matches.
The Rest of Clix’s Setup Beyond the Keyboard
A keyboard never works alone. If you want the full picture of how Clix’s inputs feel, you need the surrounding gear too, because mouse weight, monitor refresh rate, and pad surface all shape how the keyboard integrates into his play.
| Category | Reported Gear | Why It Matters |
|---|---|---|
| Mouse | Logitech G Pro X Superlight (has also used Finalmouse models) | Ultralight body supports low sensitivity arm aiming |
| Monitor | 240Hz competitive monitor such as a BenQ ZOWIE XL series | More frames shown means faster visual feedback on edits |
| Mousepad | Large control-to-speed hybrid pad | Room for wide low-sens swipes next to a compact keyboard |
| Headset | Logitech G Pro X or similar | Clear footstep and build audio directional cues |
| Chair and desk | Standard gaming chair with a wide desk | Consistent arm angle keeps keyboard reach repeatable |
Here is a data point worth chewing on. Moving from 60Hz to 240Hz cuts the average time a new frame takes to appear from roughly 8.3 milliseconds to about 2.1 milliseconds. Pair that with an analog keyboard that can register a press in under a millimeter of travel, and the entire chain from finger to screen tightens up. Neither piece does much alone. Together, they shave real time off every exchange.
That said, the ranking of upgrades matters. If you are choosing where to spend, monitor refresh rate and stable frame rate usually deliver bigger gains than a keyboard swap, followed by mouse weight and sensor, then keyboard. Clix wins because of thousands of hours of practice on a consistent setup, not because of any single product.
Common Myths and Mistakes About Pro Keyboards
Search results about pro gear are full of shortcuts and half-truths. Let us clear up the biggest ones before you spend money.
- Myth: Buying Clix’s keyboard will make you build like Clix. Hardware removes friction, it does not create skill. His edit speed comes from years of daily repetition.
- Myth: You need a 60% keyboard to be competitive. Plenty of top players use TKL and full-size boards. The 60% form factor helps low sensitivity players who need desk space. If you play at higher sensitivity, the benefit shrinks a lot.
- Myth: The shortest actuation always wins. Overly short actuation causes accidental inputs, and accidental inputs cost more games than slow inputs do.
- Myth: Wireless keyboards are too slow for gaming. Modern wireless latency is well under the threshold most players can feel. Wired is still simpler and cheaper, though.
- Myth: Expensive means better. A two hundred dollar board with the wrong switches for your hands will lose to a seventy dollar board that fits you.
The most common practical mistake is chasing gear instead of fixing settings. Before you buy anything, check that your frame rate stays high and stable, that V-Sync stays off, that your monitor runs at its full refresh rate in Windows display settings, and that your in-game sensitivity has stayed the same long enough for muscle memory to form. Those four fixes are free and often produce a bigger jump than a new keyboard.
Another quiet mistake is switch fatigue. Extremely light, extremely short switches feel amazing for an hour and can feel twitchy over a six-hour session. If your fingers hover instead of rest, you will misfire. Test your setup during a long session, not just a warm-up.
How to Build a Clix-Inspired Setup at Any Budget
You do not need his exact hardware to get the same feel. You need the same three ingredients: a compact layout, linear switches with short travel, and a setup that lets your mouse arm move freely. Here is how to get there in order of priority.
- Pick your form factor first. Choose 60% or 65% if you play low sensitivity or have a small desk. Choose TKL if you want arrow keys and a little more comfort for schoolwork or office use.
- Choose linear switches. Reds, Gateron Yellows, or Speed Silvers all work. If you can afford it, go magnetic Hall effect for adjustable actuation and Rapid Trigger.
- Get a hot-swappable board if possible. Hot-swap sockets let you try different switches later without soldering, which is the cheapest way to fine-tune feel.
- Match your mousepad to your keyboard size. A compact board only pays off if you actually use the reclaimed space for a bigger pad.
- Set your binds before you grind. Move wall and floor to your mouse thumb buttons if your mouse has them, then keep every remaining build key within reach of a still palm.
- Tune actuation slowly. On an analog board, start around 1.5mm, drop by 0.2mm at a time, and stop the moment you notice unwanted inputs.
Three Budget Tiers
On a tight budget, roughly under sixty dollars, look for a hot-swappable 60% or 65% board from a value brand with Gateron Yellow or Red switches. You will get 90 percent of the competitive feel for a small fraction of the cost. Spend the savings on a large mousepad.
In the middle tier, around one hundred to one hundred fifty dollars, you can now find magnetic Hall effect keyboards with Rapid Trigger and web-based configuration software. This is the sweet spot for most competitive Fortnite players today, because the core features that matter arrived in budget-friendly boards.
At the high end, the Wooting 60HE or 60HE+ remains the reference point that Clix and many other pros landed on, with mature software, excellent latency, and per-key tuning. If you compete for money and want zero doubt about your inputs, that is where the money goes.
Frequently Asked Questions About Clix’s Keyboard
Does Clix use a Wooting keyboard?
Yes. Clix has used the Wooting 60HE, the 60% analog Hall effect board that became extremely popular in competitive Fortnite for its adjustable actuation and Rapid Trigger. Many top players made the same switch during the same period.
What keyboard did Clix use before the Wooting?
He was best known for the Ducky One 2 Mini with Cherry MX Speed Silver switches. That combination defined competitive Fortnite hardware for several years and still holds up well today.
Is a 60% keyboard actually better for Fortnite?
It is better for players who need desk space and never use the keys a 60% removes. It is not inherently faster. The real advantage is mouse room and a tidier hand position, not raw input speed.
What switches should I buy if I want to build faster?
Start with a light linear switch. Cherry MX Speed Silver, Gateron Yellow, or any Hall effect switch with adjustable actuation all fit the bill. Avoid clicky switches if speed is your goal.
Do I need Rapid Trigger to compete?
No, but it helps with rapid repeated presses like resets and quick edits. Plenty of strong players still win on standard mechanical boards. Just check your tournament rules if you plan to use advanced features like snap tap or SOCD handling.
Does Clix use his mouse buttons for building?
Yes. Mapping wall and floor to thumb buttons is a core part of his layout. It splits the workload between both hands and shortens the distance his left hand has to travel during a build sequence.
How much does a setup like his cost?
A close match with a Wooting-class keyboard, a lightweight mouse, a 240Hz monitor, and a large pad usually lands somewhere between eight hundred and twelve hundred dollars, not counting the PC. A smart budget version of the same feel can come in under two hundred dollars for peripherals.
So when people ask what keyboard does Clix use, the honest answer covers two boards and one clear philosophy. He runs the Wooting 60HE today for its magnetic Hall effect switches, tunable actuation, and Rapid Trigger, and he built his reputation on the Ducky One 2 Mini with Cherry MX Speed Silvers. Both boards are 60%, both use light linear switches, and both keep every build key inside a tiny radius of his resting hand. That consistency, not brand loyalty, is the real takeaway.
Use his setup as a blueprint instead of a shopping list. Pick a compact board that fits your desk, choose linear switches that feel comfortable over long sessions, map your builds close to your fingers, and then leave everything alone long enough for muscle memory to lock in. Gear opens the door, but the reps you put in behind it are what carry you through. Get the fundamentals right, stay patient through the adjustment period, and you will feel your building sharpen far more than any spec sheet could promise.
